Adafruits Raspberry Pi 5 case mod for 7" Klipperscreen case (by Ganjew420)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modification of Adafruits RPi 5 case so it can be mount to the7" Klipperscreen case Ganjew420 designed.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 414
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
I really liked the Klipperscreen case made/shared by Ganjew420, but I have a Raspberry Pi 5, which I did get to fit (here), but not as well as I was hoping, unless I cut some parts out. But even then, it doesn't work right because the power button necessitates drilling a hole in the outer closure, and the port for an audio jack in the original case is pointless and there's only one port in the case for a PiCam ribbon cable (the RPi 5 can have 2).
I came across Adafruits RPi 5 case models, and decided I like that a lot more. It fits perfectly, and if you use the Official Raspberry Pi 5 Active Cooler, you can easily take the top cover off without needing to unplug the fan.
- Original model (by Ganjew420): https://www.printables.com/model/349052
- Original Adafruit Raspberry Pi 5 case files: https://learn.adafruit.com/pi-5-case/cad-files