1 / 1
Rivian R1T and R1S Center Console Camp Drawer Bolt-On (Mk4 Remix)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A drawer replacement for the Camp Speaker that is provided by default with all Rivian R1T and R1S electric vehicles.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 761
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
This 3D print model is a modified version of the original camp drawer design for the Rivian R1T and R1S center console. It has been adapted to fit the Mk4 printer bed.
Mk4 Compatibility: The camp drawer surround part has been adjusted to fit the dimensions of the Mk4 bed without altering the original design's functionality.
Printing Recommendations:
- Filament: A high-temperature resistant filament like ASA is recommended for its durability. The use of a high-quality brand is advised based on testing.
- Settings: 20 percent infill, 0.15mm layer height, and supports are recommended.
- I used organic supports on the front model and snug supports on the surround model.
- When printing with ASA, a brim is recommended.
Assembly Parts Required:
- 6 M5x12mm countersunk screws
- 6 M5 hex nuts (Insertion may require some force or cutting excess filament)