Cat Yarn Spindle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cat themed yarn spindle/spike I made for my wife so she can pull yarn from the outside while crocheting.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 796
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a cat themed yarn spindle/spike created in Tinkercad, sliced with Anycubic's Slicer, and Printed on my Kobra 2 Plus.
I printed using a 20% honeycomb infill, .2mm Layer height, Print temp was 215C, 1.75mm PLA for material and no supports were needed.
PLA Used: Anycubic Black PLA
**Please share your prints and let me know what you think. This is was mostly a project to dip my toes into messing with Tinkercad but hope it might help someone looking for these yarn spindles because I didn't see a lot available.