1 / 3
RatRig Stronghold Spoilerboard hold down — zdjęcie 1
1 / 3

RatRig Stronghold Spoilerboard hold down

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple angle bracket for holding down the spoilerboard/waste board of a RatRig Stonghold CNC

Ocena
5 / 5
Polubienia
5
Pobrania
31
Wydruki
2
Wyświetlenia
219
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A simple angle bracket that is capable of holding down the spoilerboard/waste board. It should be able to accommodate board thicknesses from 9mm up to 18 mm. It is intended to be fastened to the side profiles with M6 bolts (flat head) and nuts.