Shoe Rack Filament Storage Stabilizer Braces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stabilizing braces for filament storage using shoe rack
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 68
- Wydruki
- 4
- Wyświetlenia
- 505
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I saw this simple solution of using an affordable shoe rack for filament storage. I found the shelf to be pretty wobbly once filament was loaded and designed these stabilizing braces to give me a little more confidence it's not going to come crashing down.
I tried a few levels using these spacers which made it even more unstable. With these stabilizers in place I was able to use the spacers scaled vertically 150% to give enough clearance to store most filament boxes.
There are many shelf designs that look the same. I bought this shelf.
In order for the braces to snap around the bars the material needs to be slightly flexible. I recommend PETG as it is both durable and slightly flexible. Do not use matte PETG. I tried it and it is too brittle - the clips for the bars snapped off.