1 / 4
AD5M Glass Bed Conversion Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enables a 235x235x4mm glass bed to be mounted directly to the magnetic build plate of the Flashforge Adventurer 5M.
- Ocena
- 5 / 5
- Polubienia
- 82
- Pobrania
- 562
- Wydruki
- 1
- Wyświetlenia
- 3050
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (1)Kolekcje (106)Powiązane
Place glass directly on magnetic build surface. Place clips approximately where shown.
Print using ABS/ASA, 2 wall loops 0% infill.
Place top flange on glass first, at an angle, then push the bottom flange under the bed. To remove, press out and down on clip wing.
