Rack It Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool holder designed for Bunnings Rack It 1000KG shelving system.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
V2 has superseded this design.
https://www.printables.com/model/844412-rack-it-1000kg-spool-holder-v2
-----
This design is for the Bunnings Rack It 1000KG shelving system.
https://www.bunnings.com.au/brands/r/rack-it
The spool holder will hold 6 filament spools for easy swapping in and out.
Design can be mirrored for the opposite side.
You will require 2x 600mm M8 rods, I purchased the one linked below and cut it into two for my rails.
https://www.bunnings.com.au/macsim-m8-x-1-2m-hot-dipped-galvanised-threaded-rod_p2410295
I used AndrewAggenstein Fila_Role.stl with 608 bearings for the spool rollers.
https://www.thingiverse.com/thing:4778885/files
Once printed I over-screwed the rods into one side, then screwed them back into the other bracket, being careful to keep both plates parallel to each other.