Motorola MB8600 Modem Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of loopj's Motorola MB8611 / MB8600 / MB7621 Cable Modem Rack Mount 1U-ish.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 425
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This MB8600 Modem tray allows you to mount this modem in a standard 19" rack. While this fits perfectly into a 1U slot, the modem sticks up slightly higher, so it is recommended to have this placed under a blank or something like a patch panel that has some space to allow for the extra height of the modem.
I have included the left wing and three options for the right wing.
This prints beautifully in PETG, but I notice it sags a little due to the weight of the modem. My rack is a shelf top rack, so I designed a support stand that snaps into the hexagonal design and supports the weight of the modem by standing on the shelf. You will just need to modify the height of the legs.
For printing, orient the faces of the wings and the modem tray down on the print bed. The hex design of the tray will print without supports, but I used supports on everything just to make sure there was no sagging.
Printed PETG with 30% infill, Gyroid, no brim or skirt.