Lifetime Teton Pro Angler 116 Kayak Seat Risers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of seat risers for the Lifetime Teton Pro Angler 116 Kayak.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 189
- Wydruki
- 2
- Wyświetlenia
- 1852
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a set of seat risers for the Lifetime Teton Pro Angler 116 Kayak. They were designed to fit onto the existing seat mounts for the kayak but may require a little sanding to fit. This is a V1 so it may not be perfect but I have printed them and fit them to my kayak and they work well. You will need to print these with a high amount of infill and several walls. Print two of each part for the four corners of the seat. I also chose gyroid infill for added strength. This part is a load bearing part so set your print settings accordingly. If you have any feedback for me about this model or ways that I can improve it please let me know for future revisions. Thanks, & happy printing!
Note, these will not work with any other model.