1 / 4
Skadis Halter Wiha Schraubendreher - Skadis holder Wiha screwdriver — zdjęcie 1
1 / 4

Skadis Halter Wiha Schraubendreher - Skadis holder Wiha screwdriver

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Skadis Halter Wiha Schraubendreher Wechselklingen System 4 0610 holder Wiha screwdriver with interchangeable blades

Ocena
0 / 5
Polubienia
3
Pobrania
25
Wydruki
0
Wyświetlenia
188
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

11.03.2024 - Update :
die STL, STP und 3fm Dateien wurden ausgetauscht.
Die Bohrung ist um 0,2mm zu große gewesen, was das ganze etwas zu locker machte. Ist jetzt berichtigt.
the STL, STP and 3fm files were exchanged.
The hole was 0.2mm too big, which made the whole thing a bit too loose. It's now corrected.

Ich war schon so dran einige Skadis Halter zu erstellen, da habe ich auch noch einen simplen Halter bzw. eine ABlage für meine Wiha System 4 Schrauber erstellt. Yo is jetz nicht der Hit aber es tut.

I was already in the process of creating some Skadis holders, so I also created a simple holder or tray for my Wiha System 4 screwdrivers. It's not a hit now, but it works.
the T-clips are from:
https://www.printables.com/de/model/472294-skadis-t-clip-system-low-profile-flush-mount-clips

Slicer / 3mf : BambuStudio
Filament: Bambu PLA Tough
Nozzle: 0,4
Plate: High temp with glue
Layer : 0,16
first Layer : 0,20
Wall : 3
Upper layers : 3
Lower layers : 3
Infill : 15% Gyroid
Raft : No
Support : No

Tagi