1 / 7
Cord Rope Ratchet with the Spring of a Ballpoint-Pen — zdjęcie 1
1 / 7

Cord Rope Ratchet with the Spring of a Ballpoint-Pen

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cord ratchet for small applications like LED-Lights or Filters. Uses the spring of a Ballpoint-Pen.

Ocena
5 / 5
Polubienia
94
Pobrania
351
Wydruki
2
Wyświetlenia
2098
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

A ratchet for various usecases.

 

Printing: No supports, 0,2mm layer height, 4 perimeters, 15% infill

Assembley: Baseplate > Spring + Stopper bottom + Ratchet bottom > Rope/Cord 

> Ratchet top > Stopper top > Topplate

Tools req.: You will need a basic spring from a Ballpoint-Pen and a 4mm diameter Rope.

                        

Version 1: 2x M3x20 (or longer) and M3 nut - The M3 goes all the way through - more stable.

Version 2: 2x M3x10 - The M3 screws right into plastic.

 

TIP: Might be useful to grease some of the moving parts to improve lifetime and workflow.

DO NOT GREASE WHERE THE ROPE/CORD RUNS. Otherwise it will slip.

 

Tagi