POC Coron Air Spin Visor Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
POC is no longer making or stocking visors for this helmet so here's a replacement.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
POC is no longer making or stocking visors for this helmet so here's a replacement. I printed in PETG, but should work well in ABS, ASA or other tough material.
Model is split in 2 parts to fit in a 225mm bed. To print, split the model into objects and print one at a time or use the two files provided. Each part should be oriented so that the top of the visor sits flat on the bed. Print with supports on the bottom curved section (see photos) and the cutout section on part B.
To assemble, thoroughly clear all support material from the zones where the two halves connect and test fit where the pins and holes meet. Once fit is good, take apart and apply adhesive between parts. I used black RTV. Assemble and clamp the joint while it cures.
For best fit, also print 3 Bolt Spacers. These will replace the original spacers that have a top flange.