Bastard v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desktop case for full size ATX motherboard
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 341
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted a small desktop case for a full size ATX motherboard, so i made one.
Will fit mATX & ATX motherboards and have no problems with 900w psu.
There is a space limit for GPU, 3fan cards will not fit. (I think 270mm is max lenth)
Made place for 3pcs 3,5" harddrives.
Two 120 fans in front and one on the back.
There are room for Pwr,Rset,HDD/pwr-leds on the right side of front mesh, but you have to drill the last part.
I dont want any leds or buttons to show.
Screw holes are “printed" m3, (top piece to bottom piece are m4.)
(i used some wood screws i found in a box, it works as well)
Print stl's marked with “mesh” flat and with no top/bottom layers, choose a nice looking infill.
All other parts, just get them printed with settings that works on your printer.
Minimum printbed to not split parts is 334x313mm
Printed mine in PLA but ABS/PetG would be a better choise.
And yeah, my printer added layer shifts and wobbly sides, but it works……