1 / 4
Beacon mount Neptune 4/ 4Pro for OrzOrzOrz Fan Shroud V5 — zdjęcie 1
1 / 4

Beacon mount Neptune 4/ 4Pro for OrzOrzOrz Fan Shroud V5

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount for Beacon3D probe that specifically fits the fan shroud created by OrzOrzOrz

Ocena
5 / 5
Polubienia
18
Pobrania
57
Wydruki
3
Wyświetlenia
1217
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

.3mf file included for print orientation and support requirements. Recommend using a filament with some heat resistance like PETG due to the proximity to the heated bed and nozzle. Like any probe mount you don't want this to droop or shift. Requires one M3x8 machine screw and one 2mm self tap screw, both can be scavenged from disassembling the factory shroud. The 2mm self tap screws directly into the fan shroud, no pre-drilling required.

Tagi