1 / 4
Belt Fastener Knob for The 100 1.1 — zdjęcie 1
1 / 4

Belt Fastener Knob for The 100 1.1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Belt Fastener Knob for The 100 1.1

Ocena
0 / 5
Polubienia
2
Pobrania
23
Wydruki
0
Wyświetlenia
155
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Here are my Belt Fasteners Knobs for my The 100.

I used 35mm M3 screws and reversed it in the Belt Festeners.

Then i used for each knob a melt nut and put it into the hole. Now you can use it for its job.

 

For the cool skin i used the fuzzy skin in Prusaslicer. Here are my configuration. :-)

 

I printed it with 0.2mm, 4 perimeters and 25% infill.

Tagi