Carrera Digital 132 Camera Car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A camera base and holder to mount a GoPro on a Carrera Digital 132 car. The base fits on the chassis of the BMW M3 GT2…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 942
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
A camera base and holder to mount a GoPro Hero 3+ on a Carrera Digital 132 car.
The base fits on the chassis of the BMW M3 GT2 - 30512.
There are two versions of the base:
V1 uses the original chassis-screws to fix the camera base.
V2 uses M2 nuts in the camera base and M2x16mm screws instead of the original screws.
For the camera holder there are two M3 nuts at the inside of the camera base and two M3x12mm screws from the outside.
The camera can be turned around so it is possible to film the frontside or the backside.
Print Settings
Printer Brand:
AnkerMake
Printer:
AnkerMake M5
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
25%
Filament: Ankermake PLA+ Black
Category: Hobby