1U Rack Mount Device Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket for mounting a 1U device like a router or switch to a wall. The first version was more of a…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a bracket for mounting a 1U device like a router or switch to a wall.
The first version was more of a flattened Z instead of an H with a leg missing. This worked well, but it was impossible to get a finger in between the wall and the tab on an RJ-45. This version stands the device out from the wall by about 5mm, which seems to be sufficient.
The mounting hole is sized for a #8 sheet metal screw.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Resolution:
0.15mm
Infill:
20%
Notes:
Actually printed on a Prusa i3 Mk3, but Thingiverse is refusing to add the Mk3.
Printed in PLA, but ABS should work just as well.
Category: Electronics