1 / 7
Adapters for Full Face Snorkeling Mask and HEPA filter for testing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapters for the SEAC Unica Full Face Snorkeling Mask and Gibec 0124 Iso Gard HEPA Light filters - for testing only.…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Adapters for the SEAC Unica Full Face Snorkeling Mask and Gibec 0124 Iso Gard HEPA Light filters - for testing only. Adding filters to these masks can be dangerous.
There are four version with/without latch and/or o-ring. Please provide feed back.
For printing in PETG, 0.4mm nozzle, 0.2 mm layer height, 3 perimeter 30% infill. Print these slow to ensure perfect layer adhesion at 50mm/sec to get them as air tight as possible.
Empiricus@Dremomys
Category: DIY