Sony A to Canon EF/EF-S adapter slim version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So I have a Sony 75 to 300mm but no Sony body, on the other hand i have a Canon EOS 2000D. At first the original file…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So I have a Sony 75 to 300mm but no Sony body, on the other hand i have a Canon EOS 2000D.
At first the original file is fine no problem with that but on my lens i have a 2mm gap so i made my own slim model.
I just wante to warn about the fact that this adapter is not with a build like a tank in mind so about 1.5mm of this adapter is 1 wall thin keep that in mind.
Also for the print settings i recommend using PETG (as I print my with and it's stronger than PLA espetialy for that 1 wall thinkness) and put some support, or turn it upside down.
Normaly this allow focus to infiny
Category: Camera