Soft Tape Spool - Ball Bearing Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An enclosed spool for holding a soft tape with a ball bearing for smooth rotation.
- Ocena
- 0 / 5
- Polubienia
- 86
- Pobrania
- 144
- Wydruki
- 1
- Wyświetlenia
- 889
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Soft Tape Spool - Ball Bearing Edition
This is an enclosed spool for a 13mm (0.5inch) wide and 150cm (60inch) long soft tape that uses a 22mm ball bearing for smooth rotation. I encourage you to modify this model to fit your own soft tape and ball bearings. If there is interest, a parametric version can be made to accommodate this more easily.
Both 3MF and STEP files are included.
Bill of Materials
~40g filament
1 x 22mm ball bearing
1x soft tape (13mm x 150mm)
Assembly Instructions
- Fit the ball bearing into the corresponding hole in the inner piece.
- Insert the far end of the soft tape into the accompanying slot. Trimming the piece may be required here to get the soft tape to fit.
- Insert the inner assembly into the outer piece, pushing firmly to fit the ball bearing onto the post.
Print Settings
Printed on an Elegoo Neptune 3 PRO
PLA
Use painted on supports for the inner piece. Paint a small circle on the flat overhang where the ball bearing will rest (example shown in photo 7).
No supports required for outer piece.
Supports: For support enforcers only
Support style: Snug
0.20mm layer height
Infill: 20%
Used filament: 37.21g
Print time: 3h33m