L-bracket for DSLRs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
L-bracket I made for Canon 5D Mark II-IV and 6D, but it should fit other DSLRs as well. Printed this in Carbonfiber…
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 294
- Wydruki
- 0
- Wyświetlenia
- 2144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
L-bracket I made for Canon 5D Mark II-IV and 6D, but it should fit other DSLRs as well. Printed this in Carbonfiber PETG 5 layers all around and 50% triangle infill. After printing snap off the support and the lower bars on the arca style dove tail and re-cut the 1/4-20 treads. Ad a 1/4-20 camera screw. You could ad a rubber piece in front of the lower left corner of the camera. Included is a piece I printed in Ninjaflex and glued into that corner for a secure fit of the camera. The bracket seems fairly indestructible and is completely inflexible.
Update: Version 2 is slimmer and fits the 5DM2 more tightly. Realized the material is strong enough for this smaller version.
Empiricus@Dremomys
Print Settings
Printer Brand:
Wanhao
Printer:
Duplicator 6
No
Supports:
Yes
0.150 mm
Infill:
50%
Notes:
Carbonfiber PETG 5 top, bottom and perimeter layers 50 % infill.
Cusion in Ninjaflex, 2 perimeter 5 top and bottom 30% infill.
Category: Camera