Sunshade for Epson Moverio BT300 and protective case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this shade to allow better view of the projected image in bright sunlight and as a protection for the glasses.…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this shade to allow better view of the projected image in bright sunlight and as a protection for the glasses. Insert the glasses from the back. I printed this top down or standing on the back which needs much more support.
Printed this in PETG. ABS should be fine but PLA may be too stiff.
Added a case for the Moverio with attached sunshade so I can carry this around assembled.
In 4 parts as my print bed was too small. Glued together with epoxy. Needs 2x20mm M4 screws. New case version also holds the controller.
Empiricus@Dremomys
Print Settings
Printer Brand:
Wanhao
Printer:
Duplicator 6
0.150
Infill:
30%
Notes:
PETG
Category: R/C Vehicles