Ineos Grenadier Number Plate Light Shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shield or cover to remove glare from number plate light in reverse camera image.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 394
- Wydruki
- 2
- Wyświetlenia
- 1550
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Covers number plate lights to completely remove glare in reverse camera image. Left and right side files as this model has an angled base that allows the shield to sit on the same plane as the bumper surface (plate lights are angled approx. seven degrees). Attach with slightly longer screws with same thread pitch as originals. Shown printed in Overture black PETG 0.15mm layer height 30% infill no support. Angle model at 7 degrees for right and 353 degrees for left on the Y axis to sit flat on your base plate. I would recommend printing in PETG or ABS to be UV stable. Works best with narrower US & standard Aus plates, still good with Euro plates but corners not a bright as center section of plate.