DJI Mavic Pro Adapter for Moverio Epson BT300
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Epson Moverio BT-300 controller will securely snap into these cradles. Two iterations, the longer version protects…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Epson Moverio BT-300 controller will securely snap into these cradles. Two iterations, the longer version protects the cable attachment in the back of the Epson controller. I suspect this may be a point of cable breaks if you use a strap around the neck to keep the controller level. The short version is more compact otherwise the same. Designed so that you can leave all assembled and switch the BT-300 controller easily on and off. I printed this in PETG. ABS should be fine but PLA is probably not flexible enough. Enjoy Life.
There is now a case for this with the two controllers attached. http://www.thingiverse.com/thing:2389371
Empiricus@Dremomys
Print Settings
Printer Brand:
Wanhao
Printer:
Duplicator 6
0.150 mm
Infill:
50%
Notes:
I printed this in PETG
Category: R/C Vehicles