Biltema Pegboard Can Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I first made simple alteration to Droidski's design to fit this to Biltema Pegboard, but after a month of use, the…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I first made simple alteration to Droidski's design to fit this to Biltema Pegboard, but after a month of use, the lower thing holding the can in place, broke down. So I made the lower thingie stronger in this v2.
For some reason I made calculation error and the bottom screw hole is not in correct position, but the holder stays in place with just 2 top screws, so I didn't make correction. Yes, I accidently didn't save the project file...good thing this don't end the world.
Edit 27.8.2021: I needed couple more of these, so I edited the file so that all the screw holes line up now. It is the v3-file, and I took down the original file. Looks like originally I printed this with 30% infill, but now I did with 10% infill and 4 walls, and I think this is stronger now.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
30%
Notes:
Really doesn't need supports!
Category: Tool Holders & Boxes