Fujifilm DE100 Print Catcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compatible with Fujifilm DE100 and DE100-XD Photo Printers
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 238
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Compatible with Fujifilm DE100 and DE100-XD Photo Printers
Can be printed on Bambu Labs printers (barely) with build volume of 256x256x256 or larger.
If printed on a CREALITY K2 PLUS or PRUSA XL (350x350x350 or larger), the build volume allows for 4 on a build plate at once. I've added a 3MF that has this pre-configured as it's tricky to get right by yourself and it saves you the hassle.
This doesn't require the use of a brim to print and actually prints better without it.
Print requires 4x 3.5x35mm Screws per completed catcher.
The correct screws can be ordered via the links below:
MaxRes Studios does not receive any monetary incentives from the purchase of screws via these links nor is affiliated with the seller.
If you DO NOT have a 3D Printer and want this part it can be ordered here: https://www.maxresstudios.com/3dprinting/p/fujifilm-de100-catcher-print