Canik Mete MC9 Magazine Sleeve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer to make the 15 round mag more ergonomic on a Mete MC9
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 774
- Wydruki
- 1
- Wyświetlenia
- 3632
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Here we have a spacer that will utilize one of the OEM base plates from a 12rd magazine, and fill in the gaps around the 15 rounder to make it comfier for your hand. I personally printed with fuzzy skin, but you do not need to. Nothing is too fancy about the print other than the fact that you'll need supports. Other than that, in my testing .20 and .24 layer height worked just fine.
Note - all files are currently sized for the small backstrap. Medium and large to come!
Material - I recommend something like ABS but PLA is entirely fine if you keep an eye on it, and maybe print a few replacements.
I was thinking about selling prints/the file but there seems to be plenty available. If you'd like to, feel free to buy me a coffee or some rounds of ammunition!
I'll probably make improvements here and there fo fit and finish and upload versions as they come. Finally, let me know in comments (or if messages can be sent on here?) if any revisions are needed and I can get right to it. Thank you!
NOTE - this is simple a sleeve to fill the area between your Mete MC9 handle and magazine base plate. It will not add any capacity to your gun. I also claim absolutely no responsibility for anything that happens relating to this 3d Print. Always remember your rules for handling firearms ♥