1 / 2
Druckplatte für Toilettenspülung
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The old Flush had gibven up after 35+ years so I had to either replace the whole assembly or just make a new pusher!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
My so far most complicated part - really learned a lot about Fusion360 while making it.
Printed from PLA+, quite hot with 240°C to have a really strong layer adhesion. Use supports on the “wings” as shown in screenshot.
Works a charm even when the Kids are giving it a good bash.