Sir Layersalot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Introducing Sir Layersalot! With the mighty sword ExCalibration, he leads the Knights of the Level Table. This mascot…
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 181
- Wydruki
- 19
- Wyświetlenia
- 583
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
Introducing Sir Layersalot! With the mighty sword ExCalibration, he leads the Knights of the Level Table.
This mascot for Printed Solid was commissioned from the talented Carmelo Nazario (http://patreon.com/thecreatorx3d)
Looking forward to seeing your makes!
This should be a fairly simple print on reasonably well calibrated printers. We advise printing this at the default 100mm scale, but have gotten good results down to about 38mm. No support, brim, or raft needed. Layer height of .1-.15mm advised. 3 shells. No infill needed for most materials.
At the 100mm scale, it will be under 40g, which is enough to print with a sample from Maker Box.
Category: Sculptures