Hueforge - Lord of the Rings - Gandalf Mountain Hat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hueforge!
- Ocena
- 4,857 / 5
- Polubienia
- 149
- Pobrania
- 423
- Wydruki
- 8
- Wyświetlenia
- 2639
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hope you all enjoy! Post your prints!
Make sure to not adjust the z height! this will mess with the layers. You can however change the x and y dimensions!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 3
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Blue
At layer #16 (1.36mm) swap to Yellow
At layer #18 (1.52mm) swap to Jade White for the rest.