1 / 4
Mordiev's Door Hinges Geared, Nutless threaded back — zdjęcie 1
1 / 4

Mordiev's Door Hinges Geared, Nutless threaded back

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Threaded backs to screw the M3 bolts if you can't get nuts (like here in Argentina).

Ocena
0 / 5
Polubienia
4
Pobrania
39
Wydruki
0
Wyświetlenia
583
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Threaded backs to screw the M3 bolts if you can't get those size nuts (like here in Argentina).

If your printer can't print the M3 thread, just use a 2,5mm drill bit or a hot screwdriver.

Add tape to the back if you want.

I used 10mm M3 bolts. 

You can use any 3mm or so bolt even with a different thread.