1 / 3
Hueforge - Lord of the Rings - Gandalf Mountain Hat — zdjęcie 1
1 / 3

Hueforge - Lord of the Rings - Gandalf Mountain Hat

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hueforge!

Ocena
4,75 / 5
Polubienia
106
Pobrania
266
Wydruki
5
Wyświetlenia
1727
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Made this for myself!

Do not change the z height but you can change the x and y by the same percentage.

I hope you enjoy!

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Jade White Transmission Distance: 3

Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Blue
At layer #17 (1.44mm) swap to Ice Blue
At layer #20 (1.68mm) swap to Jade White for the rest.

Tagi