Case for Wowstick 1f+ in rugged box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I printed Twxii's case for the Wowstick 1f+ (see my make). I now added a version of Rainer Backes' ruggedized box to fit
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I previously printed Twxii's beautiful case for the Wowstick 1f+ set. Then I thought I should have this in a rugged case - so I customized Rainer Backes parametric rugged box to fit the case snugly. I actually fits so well you don't even need glue.
Since Rainers parametric box is meant to be higher (I needed an interior height of 17 + 17mm) I had to modify the result in slicer since some parts of the hinge and latch start to stick out when you go below his specified minimum dimensions. That's why I do not include the .scad file, but only the cleaned .stl. The result turned out well, though.
This needs 6 bolts in M3x30mm. All printed in bronze PETG
Parameters used/modified for the OpenSCAD script:
InnerBoxDepth = 72;
InnerBoxWidth= 198;
InnerBoxBottomHeight = 17;
InnerBoxLidHeight=17;
InnerCornerRadius=6;
InnerChamferSize=1.5;
ScrewLength=30;
ScrewDiameter=3;
NumHinge=2;
NumLatch=2;
HingeLatchOffset = 20;