Wago 221-2411 Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holding clip for Wago 221-2411 quick splice clamps
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 370
- Wydruki
- 1
- Wyświetlenia
- 2319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
The Wago 221-2411 is a popular spring clamp splice, perfect for quickly connecting e.g. the LED bar or fans on the top of an enclosure to the power supply in the bottom. The model provides a way to clip multiple instances together. If you need more, just combine them together in the slicer.
Print with a filament able to take some stress without breaking such as PETG. Some amount of force is needed to insert the clamp.
Important: Use layer height of 0.1 mm for layers
- 1.2 - 1.6 mm
- 2.2 - 2.7 mm
A model in FreeCAD is attached as well. In addition to the standard setup the Lattice2 add-on is necessary and creating the mesh should be performed with the Mephisto generator; the default one creates a problematic stl.