X-Carve Dust Rails Sides/Front/Back
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remake of some wonderful design work over at Inventables https://www.inventables.com/projects/mwp-y-axis-…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a remake of some wonderful design work over at Inventables https://www.inventables.com/projects/mwp-y-axis-braces and https://www.inventables.com/projects/mwp-y-axis-belt-dust-guards There wasn't any source files so modification wasn't very easy. So I remade it from scratch and narrowed down the materials needed.
If you have a large enough laser cutter you can cut these as one piece. I changed the holes to fit M3 hardware and slotted them so you can move the side rails up/down and flush to the wasteboard.
I also made a front/rear variant that you can use the same braces to hold them in place.
.25" 6061 aluminum sheet to mill out 9 or 12 pieces of the stiffeners.
.125" acrylic sheet to mill or laser cut out the side plates and front/rear plate.
54 M3-10mm Bolts
36 M3 Drop-in extrusion nuts 2020 size
18 M3 regular nuts
Category: Machine Tools