1 / 10

FluxController an X-Carve electronics enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

drandolph

@drandolph_171235

I couldn't wait for the new X-Controller to come out so I made a laser cut case for my X-Carve electronics and I added…

Ocena: 0 / 5
Polubienia: 3
Pobrania: 25
Wydruki: 0
Wyświetlenia: 428
Oceny: 0

Aktualizacja u źródła: 12 kwi 2022

Informacje o modelu

Źródło: Printables
Kategoria: Tools
Licencja: Creative Commons — Attribution — Noncommercial

Szczegóły Pliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (8)

I couldn't wait for the new X-Controller to come out so I made a laser cut case for my X-Carve electronics and I added a lot of the options to the base. The relay is internal and has two plugs with separate switches which allows each one to either be on/off or relay. There is an E-Stop and the start/hold/reset buttons are there. I also moved all the connections to the front and put the control switches on the top. I also put in a viewing port so I can perform troubleshooting on the arduino or relay visually.

UPDATE: I added a version 2 where I re arranged the buttons on the top and moved the arduino mount to directly behind the fan so it gets the maximum air flow. I also moved the fan on the back up and to the right so it's inline with the front fan and above the power supply so another fan can be mounted there to move even more air.

Here is a video of it running.

Category: Tools

Tagi

thingiverse