Laser engraver rotary tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very simple rotary attachment for a laser engraver using standard reprap parts. This uses two NEMA 17 motor wired in…
- Ocena
- 0 / 5
- Polubienia
- 68
- Pobrania
- 222
- Wydruki
- 0
- Wyświetlenia
- 3067
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A very simple rotary attachment for a laser engraver using standard reprap parts.
This uses two NEMA 17 motor wired in parallel. It is cut from 1/4" MDF.
The design is simple intentionally so it can be modified and changed to fit your need. I went with two motors so there is no belts or gears or extra stuff making it more complicated.
A little trick is if you resize the rollers on the threaded rod (either the printed or cut one) to match the same size as your gear pulley on your Y-Axis then you won't have to modify your steps to run the engraver. Mine was .85" in diameter.
Parts:
2 NEMA 17 motors
2 5mm to 8mm couplers
2 8mm threaded rods about 8 inches long
4 F60ZZ Flanged bearings
(regular 608 bearings will work just fine but you will need a few extra M8 bolts)
12 M8 nuts
1 Wood glue
Category: Tools