Aquarium Water Change Diffuser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add water to your aquarium without disturbing the substrate! Prints with no supports! Durable and simple print.
- Ocena
- 5 / 5
- Polubienia
- 258
- Pobrania
- 1756
- Wydruki
- 9
- Wyświetlenia
- 6232
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This diffuser prints upside-down and does not require supports due to the 45 degree slope and angled diffusion holes. Plenty of perforations on all sides to let the water out quickly while not disturbing the bottom of the aquarium. Feet keep the diffuser level and create a space for additional water to flow out towards the aquarium wall.
Six versions are available:
For up to a 20mm aquarium rim:
Nano - 60mm x 50mm x 105mm
Small - 80mm x 70mm x 125mm
Medium - 100mm x 100mm x 150mm
Large - 130mm x 110mm x 160mm
For up to a 30mm aquarium rim:
Medium - 100mm x 100mm x 150mm
Large - 130mm x 110mm x 160mm
For up to a 50mm aquarium rim (Eurobrace):
Large - 130mm x 110mm x 160mm
Prints well in PLA with .24mm layer thickness, 4 walls and 15% infill.