Fully 3D printed rc crawler/monster truck
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Has not yet been tested
- Ocena
- 0 / 5
- Polubienia
- 86
- Pobrania
- 352
- Wydruki
- 0
- Wyświetlenia
- 3854
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this to work with an rc plane motor I had lying around (a Flite Test 2218) but I never got around to actually printing and building the entire thing. I was able to build and test one of the axles, but that's as far as I got. It needs 12 17x6mm bearings with a 6mm hole, two 9g servos, and then the motor, esc, receiver, and battery (and transmitter). Like I said I never got around to finishing it, so it has no wheels or tires, But I did make it have 6mm hexes on the end of the driveshafts so it wouldn't be hard to either find a wheel or make one, I'm just busy with other project right now. The drive train is mirrored on the other side of the spur gear, and youll need some rubber bands for the suspension. I hope I'm not forgetting anything too important, if you do make it, please let me know how it turns out!