Fritzbox 6850 5g 45° Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
45° Stand to lift the Fritzbox to the windows and increase signal strength. Possible to mount it upside and downside
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Hy
EDIT: added additional screw holes to mount the Firtzbox downside, please give me feedback if that works, because I didn't use it. Added because the Antenna is original on the backside
also added TPU feet so it doesn't slip
I designed a quick and easy stand for my Fritzbox, in my case the signal was stronger, when lifted.
I'm sure the Stand will also fit other models too.
In addition, you need two m4 screws, the stand is fixed with the original Screw holes from the Fritzbox.
With my printer there was no glue needed, the bars fit snugly.
you need to print the stand two times and the bar four times, seen in the picture. Mirror isn't needed.
Have fun, hope a few of you find it useful.