1 / 2
No 18 and No 24 Wahl clipper guard
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No 18 (2.25"/57mm) and No 24(3"/76mm) guards for Wahl hair clippers
- Ocena
- 4 / 5
- Polubienia
- 32
- Pobrania
- 440
- Wydruki
- 1
- Wyświetlenia
- 1754
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (25)Powiązane
Larger clipper guards for people who cut their own hair but find the No 12 1.5" guard leaves their hair a little too short.
I used a brim and tree supports, adding extra support along the entire curve of each fin to improve part accuracy. After printing, I sanded the fins a little with 100 grit just to break the edges and smooth the curves.