1 / 1
Pi 5 DIN Case Snap-together with ribbon and GPIO slots and 25x25mm fan
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
P5 5 DIN Snap Case with 3mm threaded inserts (4mm holes used) for a 25mm fan.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 253
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Remix of a pi 5 snap together case that just needed holes for threaded fittings (4mm holes for 3mm threads worked for me) for my externally mounted fan. Also added a GPIO slot that I use primarily for the fan power.
Printer settings aren't important but the bottom can be a little tight if you are over-extruding.