Crazy Rabbit Chess --The Bunny's Gambit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just in time for Easter! Print this for your family and friends so you have something fun to do at your gatherings!
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 1360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This project was born from the Monday Makes challenge on The LM Show Discord channel. Go check out the LM Show on Twitch and the Loyal Moses channel on YouTube and experience the awesome LM Show 3D printing community. The models being used for the Monday Makes weekly challenge were from the ‘Easter bunnies / easter rabbits’ post by Makkuro. When working with the models, I couldn't help but notice that some of them could be made into fun chess pieces--with a little modification. This is the result: Crazy Rabbit Chess.
The chess pieces are easy to print and do not require supports. Use whichever filament and colors you wish. Your imagination is the limit. If you need a chess board I have included printable board components; the slim version of the board will print a bit faster than the standard one. The included chess board is 280mm square. Glue the alternate colored squares in place. Gloop! is the best adhesive to use, but CA glue (superglue) or Canopy glue are good alternatives. If you have a printer with a smaller build surface, then scale the chess board down to fit in your slicer. Don't forget to also scale the pieces down by the same amount.
Print (1) King, (1) Queen, (2) Bishops, (2) Knights, (2) Rooks, (8) Pawns for each opponent side of the board. Two contrasting colors are recommended. Obviously, the traditional chess colors are black and white. My daughters chose the colors seen in the uploaded pictures. Most of the filament used on this project was won on the LM Show…go check it out!
- Chess Board: Wuxn Classic PLA - Grey
- Alternate Board Square: Polymaker PolyLite PLA Pro - Dark Purple
- Light Chess Pieces: Polymaker PolyLite PLA - Silk Rose Gold
- Dark Chess Pieces: Polymaker PolyLite PLA - Silk Magenta
Our colors created a kind of Alice In Wonderland theme. Make yours something fun too!
I printed the chess board parts with 0.2mm layers, 3 walls, and 10% infill. The chess pieces were printed with 0.2mm layers, 3 walls, and 15% infill.
To make things even easier, go find that cardboard chess board that you have in the closet or on a forgotten shelf in the basement. Print the chess pieces and you have a new twist for an old board. Now hop to it!!!