1 / 4
Pal Sphere Stand — zdjęcie 1
1 / 4

Pal Sphere Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I printed off a Pal Sphere (https://www.thingiverse.com/thing:6461708) and put in a Dig2Go WLED controller inside with…

Ocena
0 / 5
Polubienia
10
Pobrania
33
Wydruki
0
Wyświetlenia
487
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I printed off a Pal Sphere (https://www.thingiverse.com/thing:6461708) and put in a Dig2Go WLED controller inside with some fairy lights. I needed a stand for this so I created one. The inside is hollow to allow the sphere to rest and also a spot for the USB cable to come out from Since the project was not marked to allow remixes, I will not post the adjusted part that has a notch cut out for the USB cable, but it was simple enough. 2nd photo shows rear with a small notch for a USB cable to come out.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

.25mm

Infill:

8% gyroid (but doesn't matter really)

Filament: Hatchbox PLA Black


Notes:

I printed with organic supports to support the top of the structure, these removed with ease and even if your supports don't remove so cleanly, this is all hidden and won't ever be seen.

Category: Art

Tagi