1 / 3
Monitor/Display Control Board Case - JRY-F9LFHD-LA1
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for the JRY-F9LFHD-LA1 DIY laptop screen driver control board
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a case for the JRY-F9LFHD-LA1 DIY laptop screen driver control board.
This case only requires 4 screws although mounting the button pad requires 2-3 screws unless you used hot glue like me as I didn't have any that would work for mounting it.
No supports are required.
This board has:
- 1x DP
- 1x HDMI
- 1x 3.5mm Speaker jack
- 1x USB Power