TS100/1 CNC Kitchen Threaded Insert Gridfinity 3x2 Tray/Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A gridfinity based 3x2 Stackable Box and Tray for TS100 or TS101 Soldering iron with the CNC Kitchen Threaded Inserts
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 219
- Wydruki
- 2
- Wyświetlenia
- 1503
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a TS101 + CNC Kitchens Threaded Inserts Storage Solution for my existing Gridfinity setup (Ikea Alex) so I designed this quickly in Fusion 360.
The Gridfinity bin itself was generated by the Fusion 360 Gridfinity Plugin, the inserts were simple extrusions that I then cut with holes and a model of a TS100.
The groove allows you to push down the tip so you can easily remove it on the lifted side. The box is 6 units high and the tray should be 2 units high (just enough to fit in an Ikea Alex Drawer). I can probably reduce the box to 4 or even 3 units if someone requires it.
The tray itself also has a gridfinity base if you just need a tray for a TS100 or TS101. The extra storage space from the box can be used for extra tips or threaded inserts, accessories or the secret formula for the krabby patty.
You are allowed to remix this as much as you want, if people are interested I can also create some remixes/addons myself.
No need to attribute me if you create the same thing for another solder iron + inserts but I will appreciate it if you do.
Feel free to add additional print profiles. Mine is just a basic profile that I use for most of my gridfinity bins.
Also check out:
https://www.printables.com/model/763968-threaded-insert-box-for-ts100-cnc-kitchen
https://www.printables.com/model/775224-gridfinity-ts100-tray
https://www.printables.com/model/775281-gridfinity-cnc-kitchen-threaded-insert-tray