1 / 5
Hemera XS EBB36 Toolhead Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount to place an EBB36/SHT36 CANBus toolhead PCB to a Hemera XS
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Built this to mount a ‘standard’ NEMA14 round 36mm toolhead PCB to a Hemera XS. The only board that officially supports the Hemera XS is the Duet one. For anyone wanting to run Klipper with a CANBus toolboard, this was necessary.
Print:
- 1x toolhead mount
- 2x 3mm spacers if using a common 5015 or 4020 fan mount that has 3mm thick flanges for the bottom two mounting holes
- https://www.printables.com/model/373535-revo-hemera-xs-4020-fan-duct
- https://www.printables.com/model/298797-hemera-xs-revo-cooling-duct
BOM:
- Hemera XS
- EBB36/SHT36 or similar toolhead board
- 2x Voron spec M3 heat inserts
- 6x M3x12 button head screws. Socket heads can be used everywhere except the bottom 2 mounts as the heads touch the solder joints just barely