Sky Team Insert + Removable tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A insert to store all components for Sky Team.
- Ocena
- 4,951 / 5
- Polubienia
- 346
- Pobrania
- 3447
- Wydruki
- 50
- Wyświetlenia
- 12 958
- Oceny
- 41
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed and tested the insert with the German Sky Team version. It seems to be identical in size with the other available versions.
Insert dimensions: 247mm * 177mm * 19mm
I created different versions for larger and smaller printbeds. You can print the insert in one or two parts.
The insert is designed to use as little height as necessary. Add some layers of cardboard or foamcore below if you want a tighter fit for vertical storage. Alternatively you can print this spacer.
This is my first design, so feedback is highly welcome!
Latest Version Changes
- Added removable tray for small components
- Minor design tweaks
Print Settings
They do not really matter. There are no overhangs or small structures.
- First layer height : 0.2 mm
- Layer height : 0.2 mm
- Wall loops : 2
- Infill density : 10% Gyroid