RC Center Console Inflatable Boat

These additional components turn newPope's 1/10 scale RIB in to a Center Console RIB launch. My kit includes everything in the pictures except the base hull and the outboard motor.

There are over 45 detailed, easy to print parts with option parts for the modeller to customize their boat. These parts include the deck and forecastle parts, outer rub/fender rail, an optional pilots leaning post with hand-hold bars, a detailed center console with helm, gauges, throttle, and wind screen, as well as the aft deck with a choice of 3 detailed servo covers - a life jacket bag, a gas tank, or a Pelican case. Also includes two different style display stands.

All removable parts are designed to use 4mmx1.5mm magnets.
Most 6" figures will work as a pilot figure, or you can scale everything up to match your desired pilot figure or motor.

Start with newPope's hull found here: https://www.thingiverse.com/thing:3371274 , and pleinair37's extensions found here: https://www.thingiverse.com/thing:5152501

The outboard motor I'm using on this model is an old Robbe "Jackson 380" with a custom cowl. Other similar RC outboards could work. Old K&O motors are also perfect size for this hull at this scale.  If you choose to scale the parts to a different size, make sure to scale them all at the same percentage.

I printed the fender rub rail in TPU but it could possibly be done with PLA and carefully bent with heat.

There is also an optional aft deck part with no cutout for a servo in case you want to rig your servo differently.