KipBoy - Key Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another key holder, only with a bit of a Fallout twist :) Print out a few of each of the thin spacers to go…
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 1437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Yet another key holder, only with a bit of a Fallout twist :)
Print out a few of each of the thin spacers to go between the keys. The ones with flanges are designed to fit keys with larger holes than 3-4 mm. Use them to reduce the ability for the keys to move around.
Print instructions
Category: Organization Print Settings
Printer Brand: Prusa
Printer: Prusa Mk2
Rafts: No
Supports: No
Resolution: 0.1-0.2
Infill: ~20%
Post-Printing
Assembly
Assemble with M3x20 bolts and locking M3 nuts.
Stack the thin spacers between the keys so that they all together add up the same height as the tallest spacer.
How I Designed This
Design and simulated in Fusion 360